Large format shearography sensor

The ISI-SYS SE2 is the ideal shearography camera for outstanding applications in research and development. The isi-sys SE2 sensor is characterised by its high resolution of more than 5 megapixels. In combination with the DisplayImg software, the full 12bit dynamic range of the CCD detector can be used. Binning or regions of interest can be set to increase sensitivity or frame rate.


  • High-resolution CCD detector
  • Frame rate max. 9Hz at full resolution
  • Binning for higher frame rate and increased sensitivity
  • 12 bit dynamic range
  • Region of Interest (full, half, quarter, free)
  • Self-calibrating phase shifter
  • Manual or software controlled shear sector adjustment
  • Scalable laser power between 100 mW and 6 W, CW/pulse (triggerable)
  • Interference filter tuned to laser wavelength


The SE2 sensor has the following interfaces on board as standard.

  • F-mount lens mount (e.g. for Sigma 10-20mm)
  • Firewire

By using the F-mount standard, almost all common lenses can be used.

Technical specification

Resolution2448 x 2048
BinningAdjustable: 2×2
Bit depth (dynamic range)12 Bit
Wavelength658 nm
Powerscalable (100 mW to 6 W)
ModesCW, Pulse
Operating temperature5°C – 40°C
Power supply24 V DC
Weight (incl. optics and 2x Laser diode arrays)3,0 kg
Dimensions (incl. optics and 2x Laser diode arrays)178 mm × 176 mm × 196 mm
MountingUNC 1/4, UNC 3/8, 2x M5


Request info